Suitable to produce BRADS such as “F” and “T” brads starting from a wires band on spool. The brad nails are made by the banded wire. F (18 gauge) brad nail length: 7mm-50mm T ...

Motor: 3.0KW, AC 380V, 50HZ Working speed: 60~120 strips/min, its working speed is adjustable. Suitable for making Office staples such as 24 series, 26 series, 23 series, NO.10 etc. and Industrial ...

Steel Bar Straighten and Cutting Machine Our advantages: PLC control,automatic straightening for reinforced (round / rib steel),automatic cutting(hydraulic cutting) Foolish type of operation, just a ...

Concrete nails (steel nails) is one kind of nails made of carbon steel ,in gerneal 45# or 60# steel wire.It has the characteristics of high hardness,thick and short,good penetration and stave ability ...

Wire nail making machine (nail producing machine,nail producing equipment,nail manufacturing machine) is the machines to make wire nails(common nails). A wire nail having a head and a shank integral ...

  Besides the screw nails making machine,we also manufacturer the whole line to make bolts and nuts.to make bolts and nuts,it needs many kind of equipments such as metal processing equipments,hea ...

strengthening wire pedestal700, which have 8 gears 702, 703,706,etc to adjust steel wires, is fastened on the feeding wire shelf800 with screws . Adjust gear702 by spinning screw701 to adjust the cu ...

feeding wire pedestal800 is fastened in the form of the body100 with screw 803.The one side of draw bar 804 is linked with feeding wire eccentric disc202,  the other side of which is linked with ...

The cutting system is mainly consist of two nail knifes,of which has a alloy head to cut the steel wire bar into small nails of different nail length. Cutting system lies in the inside of left and rig ...

Wire reel system lies in the form of the machine, base seat is fixed by screw. Payoff reel is used for storing wire. The stanchion and free base is used for fixing wires. When wiring is needed, you c ...

There are many kind of screws,to make common screws,it is the simplest.a cold heading machine and threading rolling machine is ok,then you can make the common wood screws.please see the picture of thi ...

The difference of z94-4a and z94-4c type automatic wire nail making machines The characters of z94-4a: 1.this is the traditional type nail making machines,is the first generation nail machine ...

Nail making business in suitable for small invest,you can start this business both in cities and in country side. There are some ways to lower down the investment,for example,to establish the nail ma ...

There are two kinds of nail knifes,one kind is with steel head,which needs grinding every 2-3 days and can be used for many times,the other is with alloy head,which can be used for about 15 days and c ...

To some extent,to justify whether a business is good or not,we can measure by the profit it can bring and the market of the end product.Concerning nail making business,because there is always new cons ...

When making nails,there are different size of the length and diameter.The unit of diameter in different there may be some difference,the following is a conversion table shows the relationship with ...

Type:1)nets-nail head   2)smooth nail head Diameter:1.60mm–6.5mm Length:18mm–180mm Surface:no coating;hot galvanizing,electrogalvanizing Packaging:paper box+carton,or pl ...

Before buying the nail making machines,there is a question to be considered.ie where to establish the nail making factory? Because nail making machines have relatively loder noise (about 50-60 db),so ...

In india,there are also many nail making machine manufacturers,take Gurinder Engineering works as an example. The difference between our technolody and from India is: Our machines C seri ...

Our sri lanka clients orderd 2 lines of the nail making equipments.These machines are used for a new established common nail factory,the designed capacity is 3 ton per day.After this,our clients is al ...