Table of Contents
Description of Multifunctional CNC Wire Hanger Making Machine
CNC Multifunctional Wire Hanger Making Machine is used to bland wire hanger making, nylon-coated wire hanger making, galvanized wire hanger making, stainless steel wire hanger making. It can produce different shape and size wire hanger, the wire hanger output is 30-45pcs /min according to size and shape requirement.
Steel Wire, Stainless Steel, Galvanized Wire Diameter: 1.5-3.8mm, Nylone-Coated Wire Diameter: 2.0-5.0mm.
Aluminium Wire: 2.0-5.5mm。
Change Mould can produce 11inch to 19inch wire hanger.
Servo motor Induction wire feeding, fault alarm, auto counting, electric wire pay off rack, and wire hanger collect rack. Touch screen is easy to operate. Stable performance. Romiter CNC wire hanger making machine is an ideal machine for wire hanger making.
1.Electrical constitute
a.CNC automatic hanger forming machine feed mechanism 750W-2000W servo motor control, which is characterized by feeding speed, high precision length.
b. fully automatic CNC hanger molding machine of the use of three-phase 380V 1.5KW motor inverter control, easy to adjust the molding speed
c. the automatic CNC hanger molding machine operation by man-machine interface and touch panel operation buttons for automatic operation and manual operation.
2. Parameter set
A.Interface through the man-machine interface “parameter adjustment ‘automatic feeding speed setting’, ‘each feed length setting’, ‘Jog feed speed setting’.
a.Automatic feeding speed setting role in the auto-run state, the feeding speed. The unit is mm / S (seconds).
b.Each feed length setting role in the auto-run state, the total length of each hanger; production monitoring interface ‘Manual feed’ operation feed length. Units of 0.1mm.
c.Jog feed speed settings role in ‘production monitoring’ interface, ‘Manual feed’ the feeding speed operation. The unit is mm / S (seconds). The ‘jog feed’, ‘jog back material’ ‘production monitoring’ interface speed for jog feed speed 1/2.
B.”System Settings” interface by the man-machine interface ‘feed acceleration time setting’, the ’10mm corresponding pulse number ‘,’ forming the number of errors set ‘
a.’Feed acceleration time setting’, the ’10mm corresponding pulse number ‘for system debugging, customers do not need to master.
b.’Molding the number of errors set’ when the value exceeds the molding tests are completed, the number of less than the number of automatic feeding ‘molding the number of errors set’ value, the system will alarm, the HMI display alarm information. When ‘molding the number of errors set’ value is 0, the system will not be liable molding error detection to shield this alarm.
3.Instructions
A. machine interface operation
a. Jog feed: invalid operation in the loop runs; press this key, servo motor feed mechanism feeding direction of continuous operation, the release key feeding servo motor stops.
b. Jog back material: operating cycle operation is invalid; press this key, the opposite direction of the feeding mechanism of servo motor feeding continued operation, release the button, feeding servo motor stops..
c. Manual feeding: operating cycle operation is invalid; press this key once, the feeding mechanism of the servo motor operation once the feed direction, the duration of a hanger feed length setting.
d. Stop the Beep: When the system fails, the man-machine interface display failure information, buzzer, press this button, the buzzer stops tweet. Upon failure to lift the man-machine interface display fault information automatically cleared.
e. Automatically start: press this key hanger molding machine into the cyclic operation, continuous production.
f. Automatic Stop: press this key, exit the loop hanger forming machine run state, the system is in a wait state, need jog feed, jog back material, manual feeding, manual jog or automatically activated.
g. Accumulated cleared: press this button, the number of cumulative production number cleared
h. Currently cleared: press this button, the current yield is cleared.
B. Panel operation button
a. Power indicator: When the main power supply is powered on, the control loop indicator lights.
b. Buzzer: When a system fault, the buzzer, the man-machine interface displays the content of the fault, when the ‘stop beep’ key press man-machine interface “production monitoring, regardless of whether the failure to exclude, the buzzerwill stop the buzzer.
c. Speed adjustment: the molded motor inverter is used to adjust the output frequency to control the speed of forming motor running.
d. The emergency stop button: abnormal or emergency situation occurs when the hanger forming machine, press the emergency stop button, the feed mechanism and forming institutions to stop action.
e.Manual Jog: When manually jog button is pressed, the molding institutions motor to 10.00Hz frequency operation, slow the molding agency action, easy to the product debug or mold test.
f. Cycle start and stop: When you press this button, the molding machine into the circulation operation state; press this button again to exit the loop forming machine running state.
4.Precautions
a.When the molding machine is energized, and does not allow mandatory rotation feeding servo motor, otherwise it will damage the servo controller. For rotation feeding servo motor production monitoring by the man-machine interface, “” ‘jog feeding” jog back material” manual feed’ key.
b. Please ensure the molding machine and personal safety case to operate the machine.
c. The power of the machine into the line for the three-phase five-wire, three-phase line, a zero line, a ground wire. The line voltage is 380V, phase voltage of 220V, the total power is about 3KW ensure reliable grounding.
5. Main advantage
a.Length Prefeeding standards
b. The speed can be adjusted according to diameter, any of the speed.
c. The high speed is fast, the fastest production can produce 45 per minute.
d. Most convenient replacement mold (hangers styles) convenient and simple, and the screen enter the required wire length, moving knife position on the line
e. The aircraft can be adapted to the production of: 201 stainless steel, 410 stainless iron, plating line, ordinary wire coated wire and aluminum wire.
6.The 4V failure processing parameters
(PA11 tune about 2500, PA14 tune about 1500, PA38 400.)
Adjustment steps:
a.MOD key 2 times PA00 press the SET button to display the SEF-P.
b. By the middle of the two left shift on the shift key until PA11 press the SET button, press the middle two key adjusted to the desired value and press the SET button.
Finished modifying parameters to save operation, during which the uninterruptible power. Press the MOD the key to wait until the the display EEPOP has been holding down the SET key display EE-O release, complete the save.
Send Us Inquiry to Get Quotation
