Помимо общих стальных гвоздей, наш недавно разработали высокоскоростная автоматическая ногтей делая машину с низким генерации шума также можем изготовить специальные формы ногтей, такие как линолеум ногтей, кровельные гвозди, двойные ногтей крышки, U-образных гвоздей, твист ногтей, конкретных гвозди и т.д. . Это оборудование состоит из системы смазки и системы управления автомобилем. Система охватывает вождения подачи проволоки, проволоки зажим, резка, штамповка и.
Table of Contents
Z94-1C Automatic Nail Making Machine
Z94-1C automatic nail making machine can produce 450 pieces of nails per minute. All those nails come with the length ranging from 9mm to 25mm.
Parameters
| Model | Z94-1C |  |
| Max. Diameter of Nail (mm) | 1.6 | |
| Min. Diameter of Nail (mm) | 0.9 | |
| Max. Length of Nail (mm) | 25 | |
| Min. Length of Nail (mm) | 9 | |
| Designed Output (pcs/min) | 450 | |
| Motor Power (Kw) | 1.5 | |
| Weight (approx) (kg) | 560 | |
| Overall Dimensions (mm) | 1440x1040x1270 | |
| Price (USD/UNIT) | 3000 |
Z94-2C Automatic Nail Making Machine
Z94-2C automatic nail making machine is used to manufacture 16mm to 50mm long nails. Its production rate is 350 pieces per minute.
Parameters
| Model | Z94-2C |  |
| Max. Diameter of Nail (mm) | 2.8 | |
| Min. Diameter of Nail (mm) | 1.2 | |
| Max. Length of Nail (mm) | 50 | |
| Min. Length of Nail (mm) | 16 | |
| Designed Output (pcs /min) | 350 | |
| Motor Power (kw) | 2.2 | |
| Weight (approx) (kg) | 1200 | |
| Overall Dimensions (mm) | 1645x1215x1345 | |
| Price (USD/UNIT) | 4000 |
Z94-3C Automatic Nail Making Machine
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.
Parameters
| Model | Z94-3C |  |
| Max. Diameter of Nail (mm) | 3.4 | |
| Min. Diameter of Nail (mm) | 1.8 | |
| Max. Length of Nail (mm) | 75 | |
| Min. Length of Nail (mm) | 30 | |
| Designed Output (pcs/min) | 320 | |
| Motor Power (kw) | 3 | |
| Weight(approx) (kg) | 1400 | |
| Overall Dimensions (mm) | 1800x1260x1460 | |
| Price (USD/UNIT) | 4500 |
Z94-4C Automatic Nail Making Machine
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.
Parameters
| Model | Z94-4C |  |
| Max. Diameter of Nail (mm) | 4.5 | |
| Min. Diameter of Nail (mm) | 2.8 | |
| Max. Length of Nail (mm) | 100 | |
| Min. Length of Nail (mm) | 50 | |
| Designed Output ( pcs / min) | 280 | |
| Motor Power (kw) | 4 | |
| Weight (approx) (kg) | 2000 | |
| Overall Dimensions (mm) | 2000x1560x1450 | |
| Price (USD/UNIT) | 5500 |
Z94-5.5C Automatic Nail Making Machine
Z94-5.5C automatic nail making machine whose production rate is 180 pieces per minute is designed for making the nails of 80mm to 150mm long.
Parameters
| Model | Z94-5.5C |  |
| Max. Diameter of Nail (mm) | 5.5 | |
| Min. Diameter of Nail (mm) | 3.7 | |
| Max. Length of Nail (mm) | 150 | |
| Min. Length of Nail (mm) | 80 | |
| Designed Output (pcs /min) | 180 | |
| Motor Power (kw) | 5.5 | |
| Weight(approx) (kg) | 2500 | |
| Overall Dimensions (mm) | 2380x1580x1660 | |
| Price (USD/UNIT) | 6500 |
Z94-6.5C Automatic Nail Making Machine
Z94-6.5C automatic nail making machine designed for manufacturing the 100mm to 200mm long nails can produce 160 pieces per minute.
Parameters
| Model | Z94-6.5C | |
| Max. Diameter of Nail (mm) | 6.5 | |
| Min. Diameter of Nail (mm) | 4.5 | |
| Max. Length of Nail (mm) | 200 | |
| Min. Length of Nail (mm) | 100 | |
| Designed Output (pcs /min) | 160 | |
| Motor Power (kw) | 11 | |
| Weight(approx) (kg) | 5000 | |
| Overall dimensions (mm) | 3200x2200x2200 | |
| The price (USD/UNIT) | 18200 |
В процессе изготовления гвоздей, наше оборудование имеет вспомогательные машины, как катушки с проволокой, ногтей резак мясорубку и ногтей шлифовальные машины. Основные носить части ногтя формы, ногтей нож, и удар контактный.
Производство Принцип
Это оборудование включает один главный рукоятку и два боковых валов. Из-за особой конструкции подшипника, это более гладкой в работе по сравнению с традиционной ногтей делает машины. Основной ось с непосредственным приводом от электродвигателя. Кроме того, две боковые валы отдельно используется для управления ногтей измельчителя и ногтей часть формы берутся с помощью четырех конической шестерней.
Производственный процесс
Провод на проволочной колеса будет подаваться к рабочему центру через провод ролика ногтей делает машины, а затем гвоздь Головка образована с помощью штамповки пуансоном штифта после гвоздь формы зажимает провод плотно. После ослаблена ногтевой плесени, провод будет доведен до резки центр через боковую вала. Позже, гвоздь будет нарезать заданной длины. Наконец, готовые ногти будут автоматически извлечь через эжектор.
Parameters
|
Model |
Z94-6.5C |
Z94-5.5C |
Z94-4C |
Z94-3C |
Z94-2C |
Z94-1C |
|
Max. Diameter of Nail (mm) |
6.5 |
5.5 |
4.5 |
3.4 |
2.8 |
1.6 |
|
Min. Diameter of Nail (mm) |
4.5 |
3.7 |
2.8 |
1.8 |
1.2 |
0.9 |
|
Max. Length of Nail (mm) |
200 |
150 |
100 |
80 |
50 |
25 |
|
Min. Length of Nail (mm) |
100 |
80 |
50 |
30 |
16 |
9 |
|
Designed Output (pcs/min) |
160 |
200 |
260 |
320 |
350 |
450 |
|
Motor Power (Kw) |
11 |
5.5 |
4 |
3 |
2.2 |
1.5 |
|
Weight (Approx) (Kg) |
5000 |
2500 |
2000 |
1400 |
1200 |
560 |
|
Overall Dimensions (mm) |
3200* |
2800* |
2200* |
2000* |
1700* |
1500* |
 |
 |
| Wire Reel It is used for the wire coil laying |
Nail Cutter Grinder It is used for grinding the nail knife by the grinding wheel. |
Nail Polishing Machine
This machine is used for polishing the nails, caps, etc. After put into the roller, the finished nail will be free from sharp edges and greasy dirt after having been rolled together with the sawdust for about 1 hour. Then, use the sieve plate to separate the sawdust and nails. The nail could become brighter and anti-rust after polishing.
Parameters
| Type | SD-400 | SD-600 | SD-1000 | SD-2000 |  |
| Capacity | 400kg | 600kg | 1000kg | 2000kg | |
| Power of Motor | 3kw | 4kw | 7.5kw | 11kw | |
| Overall Size | 1640
*90 *1000 |
1960
*1070 *1400 |
2000 *1500 *1400 |
2500
*1500 *1600 |
Sample
Maintenance
1) Ensure the cleanness of the automatic nail making machine, and the nail mold should be frequently washed. Do not use the rusty wire for nail making.
2) Be sure the well lubrication of the nail making machine before starting. Especially for the new nail making machine, frequently lubricate the machine parts with oil, grease.
3) Regularly use the nail cutter grinder to grind the nail knife.
4) When operating the machine, you should always pay attention to the unusual noise as well as the temperature changes of the frictional parts.
Send Us Inquiry to Get Quotation
